
Cocking
Control
Release
Button
Lancet Holder
Depth Indicator
A Clear Cap Arrow Adjustable Tip
If your lancing device differs from the one shown here, please
refer to the manufacturer’s manual to ensure proper usage.
To reduce the chance of infection:
● Never share a lancet or the lancing device.
● Always use a new, sterile lancet. Lancets are for single use
only.
● Avoid getting hand lotion, oils, dirt, or debris when handling
the lancets.
Screw off the cap of the lancing device.
Insert a lancet into the lancet holder and
push down firmly until it is fully in place.
Twist the protective disk until it separates
from the lancet.
Replace the lancing device cap. Turn the
cap until it is snug but not too tight.
The adjustable tip offers 5 levels of skin penetration.
Twist the adjustable tip in either direction until
the number lines up with the arrow:
1-2 for soft or thin skin,
3 for average skin,
4-5 for thick or calloused skin.
Slide the cocking control back until it clicks.
If it does not click the device may have
been cocked when the lancet was inserted.
The lancing device is now ready for use.
Set aside for later use.
Stimulating blood perfusion by rubbing the puncture site prior to
blood extraction has a significant influence on the glucose value
obtained. Blood from a site that has not been rubbed exhibits a
measurably different glucose concentration than blood from the
finger. When the puncture site was rubbed prior to blood
extraction, the difference was significantly reduced.
On the lancets and the lancing device.
Comentários a estes Manuais